View source for Custom Part uses the Center Line!

← Custom Part uses the Center Line!

Jump to: navigation, search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page.

This is in comparison to the inside or outside of the material. If you know the outside or inside dimensions you will need to add or subtract 1/2 the material diameter for many cases and will need to do some quick trig or math for bends that don't line up to plane.

Return to Custom Part uses the Center Line!.

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Custom_Part_uses_the_Center_Line!"