View source for Preset Bend Order Buttons

'''This article shows what the Preset Bend Order buttons do and how they are used to affect the bend order of a part.'''

[[File:Bend_Sim_Order_Buttons1.png]]

===Normal Bending Order===
Clicking the '''Normal Bending Order''' [[File:Normal_Bending_order1.png]] button will cause the bending order to return to normal.

===Reversed Bending Order===
Clicking the '''Reversed Bending Order''' [[File:Reversed_Bending_Order1.png]] button will reverse the bending order to start from the end bend and work backwards. This will not change your [[Dimension Location]] at all.

===Normal Flip===
Clicking the '''Normal Flip''' [[File:Normal_Flip_Order1.png]] button will prompt you to indicate the location between which bends you'd like to place a flip. [[File:Flip_Between_Bends1.png|right]] The Output Results Table will change accordingly.

===Reversed Flip===
Clicking the '''Reversed Flip''' [[File:Reversed_Flip_Order1.png]] button will prompt you to indicate the location between which bends you'd like to place a reversed flip. The Output Results Table will change accordingly.

===Center Outwards===
Clicking the '''Center Outwards''' [[File:Center_Outwards_Order1.png]] button will prompt you to indicate the location between which bends you'd like to start bending. Then, the simulation and Output Results Table will show the bending order starting from the center and moving outwards. '''NOTE: This will usually create an error when trying to place the POB bracket on the tubing in your simulation. This is completely normal.'''

===Clear Bending Order===
Clicking the '''Clear Bend Order''' [[File:Clear_Bend_Order1.png]] button will completely clear the bending order of any actions. You will not be able to view a simulation or save the changes to the part when this button is selected.