View source for XYZ Example 1 (90 Degree Bends)

In this example, we will show you how to create a simple 12X15 "L" bracket.

'''NOTE: All XYZ locations are based upon a 0,0,0 global location. Which means that each location is referenced to an absolute location. The start point does NOT need to be 0,0,0.'''

While in the XYZ interface: 1) Zero out the '''"Start"''' row to make our start point the center of the locator.

[[File:XYZex1.1.jpg|800px]]


2) In the '''"Bend 1"''' row enter '''"12"''' for '''"X"''', and '''"0"''' for both '''"Y"''' and '''"Z"'''. - This will give us 12" from the start of the tube, to the apex of the bend.

[[File:XYZex1.2.jpg|800px]]


3) In the '''"End"''' row enter '''"12"''' for '''"X"''', '''"15"''' for '''"Y"''', and '''"0"''' for '''"Z"'''. - This will give us 15" from the apex to the end of the tube.

[[File:XYZex1.3.jpg|800px]]