Bend Mark Settings - Revision history

Fabcam1 at 15:40, 7 January 2016

2016-01-07T15:40:47Z

Fabcam1 at 22:26, 18 December 2015

2015-12-18T22:26:14Z

Fabcam1: Created page with "right

Die List

Select a die from the Die List and your bend marking information for that die will be displayed in the '''Bend Marking..."

2015-12-18T19:21:43Z

Created page with "right <h2>Die List</h2> Select a die from the Die List and your bend marking information for that die will be displayed in the '''Bend Marking..."

New page

[[File:Bend_Mark_Settings2.png|right]]
<h2>Die List</h2>
Select a die from the Die List and your bend marking information for that die will be displayed in the '''Bend Marking''' section to the right. If there are no dies in the list to the left, you must create them first in the '''[[Die Library]]'''.

<h2>Bend Marking</h2>
This section is where users will set up the manner in which their bend markings will appear on a part before it is sent out as a flat layout .dxf file or sent to the Dragon machine.

===Die Name:===
The name of the die in use will be located in this text field.

===Bend Mark Format:===
Here, check the checkboxes indicating which of the four bend mark lines you would like to be shown on the design applicable to the selected die.

===Include Bend Number===
Here, check the Include Bend Number checkbox to include the bend number in the design applicable to the selected die.

===

← Older revision		Revision as of 22:26, 18 December 2015
Line 15:		Line 15:
	Here, check the Include Bend Number checkbox to include the bend number in the design applicable to the selected die.		Here, check the Include Bend Number checkbox to include the bend number in the design applicable to the selected die.

−	===	+	===Include Bend Angle===
		+	Here, check the Include Bend Angle checkbox to include the bend angle in the design applicable to the selected die.
		+
		+	===Include Degree Symbol===
		+	Here, check the Include Degree Symbol checkbox to include the degree symbol in the design applicable to the selected die.
		+
		+	===Material OD (Preview Only):===
		+	Here, enter the outside diameter of the tubing you'd like to see in the preview screen to the right. This will only be for these preview purposes and will not change your material of your design.
		+
		+	===Bend Line Length:===
		+	Here, enter the bend line (vertical line representing the bend location) length and the bend line will adjust accordingly.
		+
		+	===Rotation Offset Angle:===
		+	Here, enter the rotation offset amount for the rotation alignment marks. This offset is calculated from the inside of the bend.
		+
		+	===Text Font:===
		+	Here, choose the font of the text you would like to show up on your design.
		+
		+	===Text Size:===
		+	Here, enter the text size as it will show up on your design.
		+
		+	===Text Location Offset:===
		+	Here, enter the offset amount for the bend mark text. The bend mark text will be located (along with the tube length) this distance away from the bend mark.
		+
		+	===Rotation Line Length:===
		+	Here, enter the rotation line (horizontal line representing the rotation) length and the rotation line will adjust accordingly.
		+
		+	===Text Location:===
		+	Here, choose the location of the text in reference to the front or back of the bend mark.
		+
		+	===Text Offset Rotation:===
		+	Here, enter the rotational offset amount for the bend mark text. This will offset the text along the y-axis.
		+
		+	===Text Angle:===
		+	Here, enter the angle that will be applied to the text.
		+
		+	<h2>Action Buttons</h2>
		+	===Save===
		+	Click the Save button in order to save the progress of your added and deleted materials from the material references list.
		+
		+	===Close===
		+	Click the Close button to close the window.

@@ Line 8: / Line 8: @@
 ===Die Name:===
 The name of the die in use will be located in this text field.
 ===Bend Mark Format:===