Difference between revisions of "Offset Part"
| (5 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
__NOTOC__ | __NOTOC__ | ||
[[File:offset_part.png|right|500px]] | [[File:offset_part.png|right|500px]] | ||
| + | [[File:offset_part_8.png|left|200px]] | ||
| + | |||
| + | |||
| + | |||
| + | Parts can be sent to the Offset Part interface by using the '''Transfer''' menu [[File:transfer.png]] and selecting the '''Offset Part''' option. New | ||
| + | |||
| + | Straight lengths of tube can also be brought into this interface clicking the '''File menu''', select '''New''', then select '''Offset Part'''. The total length and material of this section will need to be defined first. | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| − | |||
Offset Part allows offset sections to be added to completed parts. These offsets will appear similar to the section in the image shown below. | Offset Part allows offset sections to be added to completed parts. These offsets will appear similar to the section in the image shown below. | ||
| − | [[File:offset_part_1.png]] | + | [[File:offset_part_1.png|350px]] |
| Line 18: | Line 36: | ||
There are two different types of offset available: 3 and 4 bend. See image below for what each of these offsets will look like. | There are two different types of offset available: 3 and 4 bend. See image below for what each of these offsets will look like. | ||
| − | [[File: | + | [[File:offset_part_2_1.png]] |
| Line 24: | Line 42: | ||
The section of the part where the offset will be placed can be chosen here. To choose a section, either enter a section number in the '''Section''' field or click the '''Pick''' button and select a section by clicking directly on it in the part display. The selected section will be highlighted in red. | The section of the part where the offset will be placed can be chosen here. To choose a section, either enter a section number in the '''Section''' field or click the '''Pick''' button and select a section by clicking directly on it in the part display. The selected section will be highlighted in red. | ||
| − | [[File: | + | [[File:offset_part_3_1.png]] |
| Line 32: | Line 50: | ||
The offset's location can be defined as a distance from the start or end of the section to the center of the offset. Choose the starting point of the distance measurement ('''From Start''' or '''From End''') and enter the distance value in the '''Distance to Center''' field. See image below for an example. | The offset's location can be defined as a distance from the start or end of the section to the center of the offset. Choose the starting point of the distance measurement ('''From Start''' or '''From End''') and enter the distance value in the '''Distance to Center''' field. See image below for an example. | ||
| − | [[File: | + | [[File:offset_part_4_1.png]] |
| Line 47: | Line 65: | ||
| − | :[[File: | + | :[[File:offset_part_7_1.png]] |
Latest revision as of 08:03, 11 September 2014
Bend-Tech 7x Wiki :: Offset Part
Parts can be sent to the Offset Part interface by using the Transfer menu 
and selecting the Offset Part option. New
Straight lengths of tube can also be brought into this interface clicking the File menu, select New, then select Offset Part. The total length and material of this section will need to be defined first.
Offset Part allows offset sections to be added to completed parts. These offsets will appear similar to the section in the image shown below.
Material
The material used to create the current part can be chosen using the material menu. To choose a new material, click the material menu and select an option from the list. To view the Tube/Pipe Library, click the Library button.
Offset Style
There are two different types of offset available: 3 and 4 bend. See image below for what each of these offsets will look like.
Affected Section
The section of the part where the offset will be placed can be chosen here. To choose a section, either enter a section number in the Section field or click the Pick button and select a section by clicking directly on it in the part display. The selected section will be highlighted in red.
Distance to Offset
The offset's location can be defined as a distance from the start or end of the section to the center of the offset. Choose the starting point of the distance measurement (From Start or From End) and enter the distance value in the Distance to Center field. See image below for an example.
Offset Size
The size of the offset can be defined here. The Horizontal Offset is the distance across the length of the tube that the offset spans. The Vertical Offset is the distance between the section and the top of the offset section. See image below.
Details
- Bend Dies: If the offset is a 4 bend offset, the first die will be applied to the first two bends and the second die will be applied to the second two bends. If the offset is a 3 bend offset, the first die will be applied to the first two bends and the second die will be applied to the third bend. To select a die, click either of the Bend Dies menus and select a die from the list.
- Side Length: The side length is the length of the left and right "legs" of the offset. See image below.
- Top Length: The top length is only available for 4 bend offsets. This will be the length across the top of the offset. See image below.
Generate
Click the Generate button 
to generate a preview of the part with the offset section shown in the bottom display window. Check the Links Displays option to have the rotation of both part synchronized.
To send the part with the offset section to a part designer to get the bending instructions, to an assembly, etc. click the Transfer menu and select an option from the list.
