Difference between revisions of "XYZ Part Tutorial"
| Line 1: | Line 1: | ||
| + | ==UNDER CONSTRUCTION== | ||
==XYZ Part== | ==XYZ Part== | ||
This tutorial will step you through the process of creating a part using the XYZ Part design interface. | This tutorial will step you through the process of creating a part using the XYZ Part design interface. | ||
| − | + | ==Start Up== | |
| − | [[File: | + | 1) Start by double clicking the "'''Bend-Tech 7x'''" icon to start up the program.[[File:Bend_tech_icon.png]] |
| + | 2) Select the "'''XYZ Part'''" icon [[File:XYZ_Part_icon1.png]] in the [[Task Menu]] under the "'''Create New'''" section to open the XYZ Part interface. The window that opens should be labeled [XYZ Part - 1].[[File:NewPartIcon2.jpg|right]] | ||
| − | In the New Design menu, | + | '''OR''' |
| + | |||
| + | 3) click the New Part icon at the top of the window or select File --> New --> Tube. Doing so will bring up the "'''New Design Menu'''". This menu will also appear automatically when Bend-Tech starts up. | ||
| + | |||
| + | *In the "'''New Design'''" menu, select the "'''XYZt'''" option under "'''Create New Design'''". | ||
| + | [[File:CustomNewDesign.jpg|400px]] | ||
| + | |||
| + | |||
| + | 4) For the purposes of this tutorial. The "'''Die & Material'''" tab is located in the upper left corner of the window. Select the "'''1.00 Material'''" and "'''2.0 Die'''" as seen here. | ||
| + | |||
| + | [[File:Material_Die.png]] | ||
| + | |||
| + | Note: If a default die and material have already been set up, they will already be selected. In that case proceed to the next step. | ||
[[File:XYZNewDesign.jpg|400px]] | [[File:XYZNewDesign.jpg|400px]] | ||
Revision as of 10:29, 19 September 2014
UNDER CONSTRUCTION
XYZ Part
This tutorial will step you through the process of creating a part using the XYZ Part design interface.
Start Up
1) Start by double clicking the "Bend-Tech 7x" icon to start up the program.
in the Task Menu under the "Create New" section to open the XYZ Part interface. The window that opens should be labeled [XYZ Part - 1].
OR
3) click the New Part icon at the top of the window or select File --> New --> Tube. Doing so will bring up the "New Design Menu". This menu will also appear automatically when Bend-Tech starts up.
- In the "New Design" menu, select the "XYZt" option under "Create New Design".
4) For the purposes of this tutorial. The "Die & Material" tab is located in the upper left corner of the window. Select the "1.00 Material" and "2.0 Die" as seen here.
Note: If a default die and material have already been set up, they will already be selected. In that case proceed to the next step.
Once XYZ Part has been selected, a new XYZ Part design window will open. Before designing the part, a material and die must be chosen. In the Die & Material tab, Click the drop down menu below Select Material and choose a material from the list. Click the drop down menu below Select Die and choose a die from the list.
Note: If a default die and material have already been set up, they will already be selected. In that case proceed to the next step.
Once a proper die and material have been chosen, the part design panel containing the coordinate fields will be open to edit. First, the number of bends needs to be chosen. Click the drop down menu below Number of Bends and select 3 from the list.
Make sure the box next to Refresh on Keystroke is checked. While this option is enabled, the part display will update automatically as the coordinates are being entered.
The start, each bend, and end of the part need to be given coordinate values. Enter the values into the fields as shown below. Make sure each bend's Dim Type is set to Apex.
Once the coordinates have been entered, the window should look similar to the image below. The part is now complete.
