Difference between revisions of "Start Angle?"
(Created page with "With the newer releases of EZ3D, PRO & SE you will find a field for "First Angle". This allows for the first section of tube in the display to change from going straight right...") |
(No difference)
|
Revision as of 08:30, 5 June 2014
With the newer releases of EZ3D, PRO & SE you will find a field for "First Angle". This allows for the first section of tube in the display to change from going straight right from the left on the screen.
Here is an example:
StartAngle.png
The first leg is the one under the part. Notice how it now goes up at an angle rather than straight across the screen.