Difference between revisions of "Dragon Straight Part Tutorial"
(→Tutorial) |
|||
| (7 intermediate revisions by the same user not shown) | |||
| Line 17: | Line 17: | ||
2. Now, maximize the screen [[File:Min_Max_Close_Tab.png]]. | 2. Now, maximize the screen [[File:Min_Max_Close_Tab.png]]. | ||
| − | 3. In order to start a design, select the '''1.75 DOM''' material from the material drop down menu [[File:Drag_Select Material1.png]] to the left. '''This material is specific to both this tutorial and corresponding tutorials including the [[Dragon Custom Design Tutorial]] and the [[Dragon Nesting Tutorial]].''' | + | 3. In order to start a design, select the '''1.75 DOM''' material from the material drop down menu [[File:Drag_Select Material1.png]] to the left. '''This material is specific to both this tutorial and corresponding tutorials including the [[Dragon Custom Design Tutorial]] and the [[Dragon Nesting Tutorial]](Or if you are a Dynatorch customer of ours, you will refer to the [[Dynatorch Custom Design Tutorial]] and the [[Dynatorch Nesting Tutorial]].''' |
4. Next, select the '''Tube Length''' value field [[File:Tube_Length1.png]] and enter the number '''24'''. The straight tube should appear below in the display area. | 4. Next, select the '''Tube Length''' value field [[File:Tube_Length1.png]] and enter the number '''24'''. The straight tube should appear below in the display area. | ||
| Line 23: | Line 23: | ||
[[File:Straight_24_In_Tube.png]] | [[File:Straight_24_In_Tube.png]] | ||
| − | 5. Now select the '''Cutting''' tab and hit the '''Add''' button twice to add a start and end cut [[File:add_button1.png]]. You can then change the type of cut, the material it is cutting to, the rotation, angle of crossing tube, and offset values all in this table: [[File:cutting_table.png]] | + | 5. Now select the '''Cutting''' tab and hit the '''Add''' button twice to add a start and end cut [[File:add_button1.png]]. You can then change the type of cut, the material it is cutting to, the rotation, angle of crossing tube, and offset values all in this table: |
| + | |||
| + | [[File:cutting_table.png]] | ||
| Line 56: | Line 58: | ||
12. Now hit the '''Add''' button to create an additional tube to the start cut. Change the type of cut to miter, and the rotation value to 90. | 12. Now hit the '''Add''' button to create an additional tube to the start cut. Change the type of cut to miter, and the rotation value to 90. | ||
| + | |||
[[File:table1212.png]] | [[File:table1212.png]] | ||
| − | [[File:display1212.png]] | + | [[File:display1212.png]] [[File:1picpart.png]] |
| + | |||
| + | 13. Now, select the '''Holes''' tab and input the following values into the table: | ||
| + | |||
| + | [[File:holestable112.png]] [[File:display12883.png]] | ||
| − | + | 14. With the part finished, please save the file by clicking the '''Save''' [[File:Drag_Save1.png]] icon from the icon menu bar at the top of the screen and name it '''Dragon Test1'''. This will be used in later tutorials including the [[Dragon Custom Design Tutorial]] and the [[Dragon Nesting Tutorial]], or if you a Dynatorch customer, refer to the [[Dynatorch Custom Design Tutorial]] and the [[Dynatorch Nesting Tutorial]].. | |
[[File:Dragon_Save_As1.png]] | [[File:Dragon_Save_As1.png]] | ||
Latest revision as of 07:39, 20 March 2017
Things To Know
- This tutorial will step you through the process of creating a straight design in Bend-Tech Dragon and show you the possible choices for where to take it next depending on your needs. As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way.
Tutorial
1. From the Bend-Tech Dragon start up screen, click on the Straight .png)
button to open the straight part interface.
2. Now, maximize the screen 
.
3. In order to start a design, select the 1.75 DOM material from the material drop down menu 
to the left. This material is specific to both this tutorial and corresponding tutorials including the Dragon Custom Design Tutorial and the Dragon Nesting Tutorial(Or if you are a Dynatorch customer of ours, you will refer to the Dynatorch Custom Design Tutorial and the Dynatorch Nesting Tutorial.
4. Next, select the Tube Length value field 
and enter the number 24. The straight tube should appear below in the display area.
5. Now select the Cutting tab and hit the Add button twice to add a start and end cut 
. You can then change the type of cut, the material it is cutting to, the rotation, angle of crossing tube, and offset values all in this table:
.png)
6. From here, check the Display Cross Tubes 
checkbox and the cross tubes will appear in the display.
7. Now, click and type 110 into the Angle 
value field. This will adjust the angle of the cope as shown in the display area.
8. Now, type 110 into the Angle 
value field for the end cut. This will adjust the angle of the cope as shown in the display area.
9. Next, type 180 into the Rotation 
value field for the end cut.
10. Now, type .875 into the Offset 
value field for the end cut. This will cause the cross tube on the right side of the project to offset from the centerline by half the diameter of the tubing.
11. To create a miter in the start cut, select the the start location from the table 
and click the Type 
button to change the cut from a cope to a miter, now type 90 into the angle for the start. 
12. Now hit the Add button to create an additional tube to the start cut. Change the type of cut to miter, and the rotation value to 90.
13. Now, select the Holes tab and input the following values into the table:
14. With the part finished, please save the file by clicking the Save 
icon from the icon menu bar at the top of the screen and name it Dragon Test1. This will be used in later tutorials including the Dragon Custom Design Tutorial and the Dragon Nesting Tutorial, or if you a Dynatorch customer, refer to the Dynatorch Custom Design Tutorial and the Dynatorch Nesting Tutorial..
Transferring
- After applying all of the changes to our straight part, we are free to select the desired option for transferring the part out.
- You may Transfer to Design
for adding further geometry to the part and assigning actions before sending it to the machine, or you may Transfer to Nesting 
if you'd like the current part to be added to a nesting project without altering the part further.
- See the Dragon Guide to help you decide where to go from here.
