Difference between revisions of "Mirror a Part"

Latest revision as of 08:28, 1 October 2015

Step 1: Select the part from the "Master Part List" you wish to mirror.

Step 2:) Select the "Mirror" command button.

Step 3: Select the mirror direction that best describes your part and click the "Submit" button. It will be added to the Master Part List.

Step 4: Select the part from the Master List.

Step 5: Select the "Paste Part" command button.

Step 6: Select the PickPoint to attach the part.

Note: The attachment point is the same as the start feature when the part was created.

@@ Line 1: / Line 1: @@
-Step 1) Select the part from the '''"Master Part List"''' you wish to mirror.
+'''Step 1:''' Select the part from the '''"Master Part List"''' you wish to mirror.
-Step 2) Select the '''"Mirror"''' command button.
+'''Step 2:''') Select the '''"Mirror"''' command button.
-MirrorPart1.png
+[[File:MirrorPart1.jpg]]
+'''Step 3:''' Select the mirror direction that best describes your part and click the '''"Submit"''' button. It will be added to the Master Part List.
-Step 3) Select the mirror direction that best describes your part and click the '''"Submit"''' button. It will be added to the Master Part List.
+[[File:MirrorPart2.jpg]]
-MirrorPart2.png
+'''Step 4:''' '''Select the part''' from the Master List.
+'''Step 5:''' Select the '''"Paste Part"''' command button.
-Step 4) '''Select the part''' from the Master List.
+'''Step 6:''' Select the PickPoint to attach the part.
-Step 5) Select the '''"Paste Part"''' command button.
+[[File:MirrorPart3.jpg]]
-Step 6) Select the PickPoint to attach the part.
+'''Note: The attachment point is the same as the start feature when the part was created.'''
-MirrorPart3.png
-'''Note: The attach point is the same as the start feature when the part was created.'''