Tube to Assembly Transfer

"UNDER CONSTRUCTION: THANK YOU FOR YOUR PATIENCE."

Transfer Interface

When transferring a single part from any tube designer to the Assembly designer, the user can refer to this guide for assistance.

The Transfer Menu

When transferring a part to Assembly, select the part from the display area, or from the part list and select the "Transfer Drop Down Menu" at the top of the screen on the "Icon Menu Bar".

From there, the options that are available include the "New Assembly" option, or the "Existing Assembly" option. Select the option that corresponds with the desired assembly project to begin the transferring process.

Prepare for Assembly

The "Prepare for Assembly" window was created so that users have the options to rotate the part to any desired orientation around any selected axis, mirror the part around any selected axis, and assign a coupler location using either the center of the axes (by default) or by first creating a new Pickpoint where the coupler can be placed.

Rotation Amount

The "Rotation Amount" value field is where the user can type in the degree of rotation that the part will be moved. every time the "Rotate" button is clicked.

Select the "Axis" button and then click the axis in the display area that the part is going to rotate around.