Dragon Options

Global Options

General

Default Items

• Default Die: Click on the drop down menu labeled "Default Die:" and select a die that you would like to be automatically set when opening a new part.

• Default Tube/Pipe: Click on the drop down menu labeled "Default Tube/Pipe:" and select a material that you would like to be automatically set when opening a new part.

File Storage

• Data Libraries: Click on the text field labeled "Data Libraries:" or click the "Browse" button to designate a file storage location for your data libraries. This includes dies and material information.

• Parts: Click on the text field labeled "Parts:" or click the "Browse" button to designate a file storage location for your saved parts.

Tolerances

• Rotation Angle: Click on the drop down menu labeled "Rotation Angle:" and select the tolerance for how many decimal places the part's rotation angle will read by default.

• Bend Angle: Click on the drop down menu labeled "Bend Angle:" and select the tolerance for how many decimal places the part's bend angle will read by default.

• Lengths: Click on the drop down menu labeled "Lengths:" and select the tolerance for how many decimal places or fraction increments the part's length will read by default.

Unit of Measure

• Inches: Select the "Inches" option and the part dimensions and information will appear in inches.

• Millimeters: Select the "Millimeters" option and the part dimensions and information will appear in millimeters.

Auto-Save Frequency

• Click on the "Auto-Save Frequency" drop down menu and select the amount of time it will take for the software to save your progress.

Input / Interface

• Keyboard: Select the "Keyboard" option and the method in which you input your information will be constricted to your keyboard.

• Touch Screen: Select the "Touch Screen" option and the method in which you input your information will be constricted to your touch screen.

Undo/Redo

• Number of Steps: Click the up and down arrows or key in a number into the "Number of Steps:" section to designate a number of undo or redo steps you can take when creating a design.

Misc Options

• Invert Mouse Wheel Zoom: Check the "Invert Mouse Wheel Zoom" checkbox and the mouse's zoom function will become inverted (scroll up to zoom out/ scroll down to zoom in).

• Disable Automatic Updates: Check the "Disable Automatic Updates" checkbox and the software will no longer attempt to update automatically.

• Display Orientation Axis: Check the "Display Orientation Axis" checkbox and the orientation axis will be shown on the display screen.

Main Display

• Normal: Click on the "Normal" option and the background in the display screen will be normal by default.

• Custom Color:' Click on the "Custom Color" option and choose a default color to assign to the background in the display screen.

• Image: Click the "Image" option and browse for a default picture to assign to the background in the display screen.

Machine

Basic Settings

Default Process Order

• Process Order Box: This box will contain the 3 processes that will take place in the fabrication process (Etching, Marking and Cutting). To order these in the way you want them, select one from the list and use the Up and Down arrows to decide the procession.

• Order by Part: Click the "Order by Part" option to assign the process order to each individual part.

• Order by Shift: Click the "Order by Shift" option to assign the process order to each individual shift.

Misc Options

• Long Travel Minimum: Enter a value in the "Long Travel Minimum" text field to indicate the least amount of distance that the machine will travel to still be considered a 'long travel'. A long travel will most likely be when the machine travels from one set of contours to another, or one end of tubing to another.

• Loading Offset: When using a material with a diameter larger than 3 inches, enter a value in the "Loading Offset" text field to indicate the offset distance to the end of the tubing.

• Reduce Dead-Zone by Flipping: Check the "Reduce Dead-Zone by Flipping" checkbox and the software will automatically flip certain parts to reduce the dead space that would normally lie in between them,

• Reduce Part Shifts: Check the "Reduce Part Shifts" checkbox and the software will automatically reduce the amount of shifts needed in a nesting project.

Bend Marks (Default)

• None: Select the "None" option if you would not like the bend marks assigned to an action by default.

• Mark: Select the "Mark" option if you would like the bend marks to be marked with a marker by default.

• Engrave: Select the "Engrave" option if you would like the bend marks to be engraved by default.

End Cuts (Default)

• None: Select the "None" option if you would not like the end cuts assigned to an action by default.

• Cut:' Select the "Cut" option if you would like the end cuts to be cut with the machine's plasma cutter by default.

• Mark: Select the "Mark" option if you would like the end cuts to be marked with a marker by default.

Part ID Marking

• Enable Part ID Marking: Check the "Enable Part ID Marking" checkbox and your part will be either marked or engraved with the part ID information by default.

• Part ID Font: Click on the "Part ID Font" drop down menu to choose the font that the part ID will be marked or engraved in by default.

• Part ID Size: Enter a value in the "Part ID Size" text field to designate a size of the part ID lettering. This will be in inches or millimeters depending on what your units of measurement are set to.

• Part ID Location: Enter a value in the "Part ID Location" text field to designate a location down the length of the tubing where the part ID will be located by default.

• Mark: Select the "Mark" option if you would like the part ID to be marked with a marker by default.

• Engrave: Select the "Engrave" option if you would like the part ID to be engraved by default.

Saddles (Default)

• None: Select the "None" option if you would not like the saddles assigned to an action by default.

• Mark: Select the "Mark" option if you would like the saddles to be marked with a marker by default.

• Engrave: Select the "Engrave" option if you would like the saddles to be engraved by default.

Cutter Settings

Cutting Tool

• Kerf: Enter the default width of your cut in the "Kerf" text field.

• Lift Amount (Short): Enter the height of the lift amount for a short distance travel of the plasma head in the "Lift Amount (Short)" text field.

• Lift Amount (Long): Enter the height of the lift amount for a long distance travel of the plasma head in the "Lift Amount (Long)" text field.

Corner Fix

• Add Dwell: Click on the "Add Dwell" option to ensure that a corner of two contours is cut appropriately by adding a small delay in the cut. The plasma torch will pause momentarily to avoid a cornered radius on what is meant to be a smooth transition between straight cuts.

• Add Line: Click on the "Add Line" option to ensure that a corner of two contours is cut appropriately by adding a small line to the cut. This will avoid a delay and a cornered radius on what is meant to be a smooth transition between straight cuts. This is the preferred method.

• None: Click on the "None" option and the software will not add a fix for cornered radii when cutting adjacent contours.

• Min Angle: Enter the minimum angle possible in order to require a corner fix in the "Min Angle:" text field.

• Time (milliseconds): When the Add Dwell option is selected, enter the time allotted for a pause in cutting in the "Time (milliseconds)" text field.

• Line Length: When the Add Line option is selected, enter the line length allotted for the contour in the "Line Length" text field.

Pause for Drops

• Enable Pausing: Check the "Enable Pausing" checkbox to cause the plasma torch to pause when finishing a through-cut or cope. This will ensure a clean cut-off.

• Minimum Length: Enter a value in the "Minimum Length:" text field which will determine the minimum length needed before a pause can occur on an end cut.

Travel Direction

• Right: Click on the "Right" option and the cutting direction will always start from the left and move to the right.

• Left: Click on the "Left" option and the cutting direction will always start from the right and move to the left.

Engraver Settings

Engraver Tool:

• Lift Amount (Short): Enter the height of the lift amount for a short distance travel of the engraver head in the "Lift Amount (Short)" text field.

• Lift Amount (Long): Enter the height of the lift amount for a long distance travel of the plasma head in the "Lift Amount (Long)" text field.

Corner Fix

• Add Dwell: Click on the "Add Dwell" option to ensure that a corner of two contours is engraved appropriately by adding a small delay in the etching. The engraver will pause momentarily to avoid a cornered radius on what is meant to be a smooth transition between straight etches.

• Add Line: Click on the "Add Line" option to ensure that a corner of two contours is engraved appropriately by adding a small line to the contours. This will avoid a delay and a cornered radius on what is meant to be a smooth transition between straight etches. This is the preferred method.

• None: Click on the "None" option and the software will not add a fix for cornered radii when engraving adjacent contours.

• Min Angle: Enter the minimum angle possible in order to require a corner fix in the "Min Angle:" text field.

• Time (milliseconds): When the Add Dwell option is selected, enter the time allotted for a pause in engraving in the "Time (milliseconds)" text field.

• Line Length: When the Add Line option is selected, enter the line length allotted for the contour in the "Line Length" text field.

Marker Settings

Marking Tool:

• Lift Amount (Short): Enter the height of the lift amount for a short distance travel of the engraver head in the "Lift Amount (Short)" text field.

• Lift Amount (Long): Enter the height of the lift amount for a long distance travel of the plasma head in the "Lift Amount (Long)" text field.

Corner Fix

• Add Dwell: Click on the "Add Dwell" option to ensure that a corner of two contours is marked appropriately by adding a small delay in the marking. The marker will pause momentarily to avoid a cornered radius on what is meant to be a smooth transition between straight marks.

• Add Line: Click on the "Add Line" option to ensure that a corner of two contours is marked appropriately by adding a small line to the contours. This will avoid a delay and a cornered radius on what is meant to be a smooth transition between straight marks. This is the preferred method.

• None: Click on the "None" option and the software will not add a fix for cornered radii when marking adjacent contours.

• Min Angle: Enter the minimum angle possible in order to require a corner fix in the "Min Angle:" text field.

• Time (milliseconds): When the Add Dwell option is selected, enter the time allotted for a pause in marking in the "Time (milliseconds)" text field.

• Line Length: When the Add Line option is selected, enter the line length allotted for the contour in the "Line Length" text field.

Factory Settings

Chuck Settings

• Chuck Depth: