Difference between revisions of "Preset Bend Order Buttons"
| Line 8: | Line 8: | ||
===Reversed Bending Order=== | ===Reversed Bending Order=== | ||
Clicking the '''Reversed Bending Order''' [[File:Reversed_Bending_Order1.png]] button will reverse the bending order to start from the end bend and work backwards. This will not change your [[Dimension Location]] at all. | Clicking the '''Reversed Bending Order''' [[File:Reversed_Bending_Order1.png]] button will reverse the bending order to start from the end bend and work backwards. This will not change your [[Dimension Location]] at all. | ||
| + | |||
| + | ===Normal Flip=== | ||
| + | Clicking the '''Normal Flip''' [[File:Normal_Flip_Order1.png]] button will prompt you to indicate the location between which bends you'd like to place a flip. [[File:Flip_Between_Bends1.png|right]] The Output Results Table will change accordingly. '''NOTE: This will usually create an error when trying to place the POB bracket on the tubing in your simulation. This is completely normal.''' | ||
Revision as of 10:21, 7 January 2016
This article shows what the Preset Bend Order buttons do and how they are used to affect the bend order of a part.
Normal Bending Order
Clicking the Normal Bending Order 
button will cause the bending order to return to normal.
Reversed Bending Order
Clicking the Reversed Bending Order 
button will reverse the bending order to start from the end bend and work backwards. This will not change your Dimension Location at all.
Normal Flip
Clicking the Normal Flip
button will prompt you to indicate the location between which bends you'd like to place a flip. 
