Difference between revisions of "Hole Saw/Mill vs. Plasma/Grinder"
(Created page with "Using a hole saw or mill requires a different cut versus a plasma or grinder cut. A hole saw or mill creates a knife edge to the tube. Where a plasma or grinder cut will crea...") |
|||
| Line 10: | Line 10: | ||
HoleSaw2.jpg | HoleSaw2.jpg | ||
| − | Using a hole saw requires the checking of the outside of the material only. "Check" the option "Outside Diameter Only". | + | Using a hole saw requires the checking of the outside of the material only.''' "Check"''' the option '''"Outside Diameter Only"'''. |
HoleSaw3.png | HoleSaw3.png | ||
| − | Using a grinder or plasma cutter requires checking of both sides of the material. "UnCheck" the option "Outside Diameter Only". | + | Using a grinder or plasma cutter requires checking of both sides of the material. '''"UnCheck"''' the option '''"Outside Diameter Only"'''. |
HoleSaw4.png | HoleSaw4.png | ||
Revision as of 12:59, 5 June 2014
Using a hole saw or mill requires a different cut versus a plasma or grinder cut.
A hole saw or mill creates a knife edge to the tube. Where a plasma or grinder cut will create a cut straight across the wall.
HoleSaw1.jpg
The green cut line represents the cut for a hole say and the black cut line represents that for plasma or grinder line.
HoleSaw2.jpg
Using a hole saw requires the checking of the outside of the material only. "Check" the option "Outside Diameter Only".
HoleSaw3.png
Using a grinder or plasma cutter requires checking of both sides of the material. "UnCheck" the option "Outside Diameter Only".
HoleSaw4.png
