Notches (Line)

Current Item: Plate -- Create -- Line -- Notches

File:Chamfer.PNG

Chamfer

File:Corner.PNG

Corner

File:Edge.PNG

Edge

Description

Adds a chamfer, corner, or edge to a line or pair of lines.

How-To

Select which type of notch you would like to add by clicking either Chamfer, Corner, or Edge. If adding a Chamfer or Corner, input the desired depth into the Depth field. To add the notch, click on a line and another line that you want the notch to connect to. On the second line, where you click determines which direction the notch faces. Click on the end closest to the direction you want it to face. To add an Edge, you need to input both the Depth and Width. This will create a rectangle with the depth and width that you selected which can be added to the edge of a line. The edge will be added to the closest line and will be placed on the nearest end. An edge can be added to either side of the end of a line by clicking on that side. Check the Auto-Trim box to automatically cut off any part of a line that extends past a notch.