Difference between revisions of "Decimal & Fraction"
| Line 3: | Line 3: | ||
If you use a tape measure that has fractions you may want to set these values to match up. With all NC or CNC machinery you will want to set it to 2 or 3 decimal places. | If you use a tape measure that has fractions you may want to set these values to match up. With all NC or CNC machinery you will want to set it to 2 or 3 decimal places. | ||
| − | [[File:DecimalFraction1.jpg]] | + | [[File:decimalfraction0.jpg]][[File:DecimalFraction1.jpg]] |
Revision as of 12:31, 26 June 2014
The "Decimal / Fraction" select box under the "Settings" tab is used to format the results "lengths" or "locations" and the "cut length".
If you use a tape measure that has fractions you may want to set these values to match up. With all NC or CNC machinery you will want to set it to 2 or 3 decimal places.
Make sure to change values in the Options menu which can be accessed by clicking the "Tools" menu and selecting "Options". The Decimal/Fraction adjustment menu can be found in the "General" tab, in the Tolerance section under "Lengths".
