Difference between revisions of "Dragon"
(→Bent Part) |
|||
| Line 14: | Line 14: | ||
===Die & Material=== | ===Die & Material=== | ||
| − | + | [[File:Dragon_Die_&_Material(1).png]] | |
| + | |||
| + | *The '''"Die & Material"''' section is where users will select the die which will be assigned to bend the part and the material associated with that die. | ||
*The '''Select Material:"''' [[File:Dragon_Select_Material(1).png]] drop down menu is where users will choose their desired material. | *The '''Select Material:"''' [[File:Dragon_Select_Material(1).png]] drop down menu is where users will choose their desired material. | ||
Revision as of 10:19, 7 October 2015
"UNDER CONSTRUCTION:THANK YOU FOR YOUR PATIENCE."
- Our Bend-Tech Dragon CAM software works alongside with Bend-Tech Industrial and is meant to prep the part(s) or project before production using the Dragon machine.
- The "Dragon Task Menu" consists of 4 options for creating a new part or nesting project. Bend-Tech Dragon will also allow transfers from Bend-Tech Industrial and other designers.
.png)
Contents
Bent Part
.png)
.png)
- Clicking on this option will allow the user to create a new "Custom Part" including bends and end cuts. It has many of the same characteristics of our "Custom Part" designer, except with a few additions that users will need in order to add copes or mitered cuts on the ends of the tubing.
Die & Material
.png)
- The "Die & Material" section is where users will select the die which will be assigned to bend the part and the material associated with that die.
- The Select Material:"
drop down menu is where users will choose their desired material.
.png)
- The "Select Die:"
drop down menu is where users will choose their desired die.
.png)
Straight (Without Cuts)
.png)
Straight (With Cuts)
.png)
Quick Nest
.png)
