Difference between revisions of "Paste Part"
(Created page with " This thread will show how to "Paste" a part to an assembly. Step 1) Select a part from the "'''Master Parts List'''". Step 2) Select the "'''Paste Part'''" command button....") |
(No difference)
|
Revision as of 15:51, 4 June 2014
This thread will show how to "Paste" a part to an assembly.
Step 1) Select a part from the "Master Parts List".
Step 2) Select the "Paste Part" command button.
Step 3) Select the "PickPoint" to locate the part.
