Difference between revisions of "Dragon Custom Design Tutorial"
| Line 3: | Line 3: | ||
==Things To Know== | ==Things To Know== | ||
*This tutorial will step you through the process of creating geometry on a straight design in Bend-Tech Dragon and show you the possible choices for where to take it next depending on your needs. As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way. | *This tutorial will step you through the process of creating geometry on a straight design in Bend-Tech Dragon and show you the possible choices for where to take it next depending on your needs. As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way. | ||
| + | |||
| + | '''If you have not completed the Dragon Straight Part Tutorial, please do so before continuing any further.''' | ||
==Tutorial== | ==Tutorial== | ||
| − | 1. Start by opening the file saved from the [[Dragon Straight Part Tutorial]] labeled '''Dragon Test1'''. ''' | + | 1. Start by opening the Bend-Tech Dragon software and opening the file saved from the [[Dragon Straight Part Tutorial]] labeled '''Dragon Test1'''. Do this by selecting '''File - Open - Straight Part''' from the top left of the window, selecting the file, then clicking the '''Open''' button. |
| + | |||
| + | [[File:Open_File_Drag1.png]] | ||
| + | |||
| + | 2. With the straight part design open, maximize the screen [[File:Min_Max_Close_Tab.png]] and click on the '''Transfer to Design''' [[File:Drag_Transfer_To_Design1.png]] button at the top of the screen. | ||
| − | + | 3. | |
Revision as of 13:03, 22 January 2016
Dragon Custom Design Tutorial 
Things To Know
- This tutorial will step you through the process of creating geometry on a straight design in Bend-Tech Dragon and show you the possible choices for where to take it next depending on your needs. As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way.
If you have not completed the Dragon Straight Part Tutorial, please do so before continuing any further.
Tutorial
1. Start by opening the Bend-Tech Dragon software and opening the file saved from the Dragon Straight Part Tutorial labeled Dragon Test1. Do this by selecting File - Open - Straight Part from the top left of the window, selecting the file, then clicking the Open button.
2. With the straight part design open, maximize the screen 
and click on the Transfer to Design 
button at the top of the screen.
3.
