Dragon Custom Design Tutorial

From Bend-Tech 7x Wiki
Revision as of 13:03, 22 January 2016 by Fabcam1 (talk | contribs)
Jump to: navigation, search
Dragon Custom Design Tutorial
Drag Cust Design1.png

Things To Know

  • This tutorial will step you through the process of creating geometry on a straight design in Bend-Tech Dragon and show you the possible choices for where to take it next depending on your needs. As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way.

If you have not completed the Dragon Straight Part Tutorial, please do so before continuing any further.

Tutorial

1. Start by opening the Bend-Tech Dragon software and opening the file saved from the Dragon Straight Part Tutorial labeled Dragon Test1. Do this by selecting File - Open - Straight Part from the top left of the window, selecting the file, then clicking the Open button.

Open File Drag1.png

2. With the straight part design open, maximize the screen Min Max Close Tab.png and click on the Transfer to Design Drag Transfer To Design1.png button at the top of the screen.

3.

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Dragon_Custom_Design_Tutorial&oldid=6819"