Transferring a SM Part Into a Tube Project

• With a part created in the "Plate/Sheet Metal" designer, select at least "3" Pickpoints before sending it to a tube Assembly.

• Under the "Create-->Point" tab, select the "Entity Mid-Point" and place a point at the center of the base point of the part.
• Then, select the "Incremental" option and type in a "-1" into the "Y:" value field and place a point 1 inch below the base point.
• Lastly, Change the "Y:" value back to "0" and type a "1" in the "X:" value field and create a point to the right of the previous one.

(See picture below.)