Finding the Length to cut all the Straight Parts

From Bend-Tech 7x Wiki
Revision as of 11:19, 5 October 2015 by Fabcam1 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is to find the length of the straight parts in your assembly.

If you want to find the length of 1 individual part you can select it from the list in your "Parts" tab, then scroll over to view the "Length" column. You can also view lengths by clicking the "Transfer" tab and selecting "Straight Parts".

Findinglength3.pngFindingLength1.jpg

Select the "Setup Sheet" button to acquire an entire list to cut. Warning: Use this sheet for the straight parts only. Do not use the cut lengths shown for the bent parts.

FindingLength2.jpg

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Finding_the_Length_to_cut_all_the_Straight_Parts&oldid=5855"