Dragon Custom Design Tutorial

From Bend-Tech 7x Wiki
Revision as of 10:50, 22 January 2016 by Fabcam1 (talk | contribs) (Created page with "'''Dragon Custom Design Tutorial''' right __NOTOC__ ==Things To Know== *This tutorial will step you through the process of creating geometry on...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Dragon Custom Design Tutorial
Drag Cust Design1.png

Things To Know

  • This tutorial will step you through the process of creating geometry on a straight design in Bend-Tech Dragon and show you the possible choices for where to take it next depending on your needs. As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way.

Tutorial

1.