Finding the Length to cut all the Straight Parts

From Bend-Tech 7x Wiki
Revision as of 07:09, 5 June 2014 by Fabcam1 (talk | contribs) (Created page with "This is to find the length of the straight parts in your assembly. If you want to find the length of 1 individual part you can select it from the list in your "Parts" tab. Sc...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is to find the length of the straight parts in your assembly.

If you want to find the length of 1 individual part you can select it from the list in your "Parts" tab. Scroll over to view the "Length" column.

FindingLength1.png

Select the "Setup Sheet" button to aquire an entire list to cut. Warning: Use this sheet for the straight parts only. Do not use the cut lengths shown for the bent parts.

FindingLength2.gif

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Finding_the_Length_to_cut_all_the_Straight_Parts&oldid=682"