Bend Angle & Spring Angle

From Bend-Tech 7x Wiki
Revision as of 07:17, 5 June 2014 by Fabcam1 (talk | contribs) (Created page with "The Bend Angle or "Angle" displayed in the results chart is the angle required as a finished angle. The spring back is not calculated into this angle. With SE you can change t...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The Bend Angle or "Angle" displayed in the results chart is the angle required as a finished angle. The spring back is not calculated into this angle. With SE you can change the decimal places by using the "Tolorance" tab in the "Options" window.

BendSpringAngle2.png

For those that have SE and the Spring Charts filled out you can select the "Display Spring Angle" check box and find the Spring Angles also in the chart.

BendSpringAngle1.png

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Bend_Angle_%26_Spring_Angle&oldid=696"