Dragon Rotation Calibration

From Bend-Tech 7x Wiki
Revision as of 10:50, 2 May 2016 by Fabcam1 (talk | contribs)
Jump to: navigation, search

"This guide will help you understand all of the processes and procedures involved in calibrating your rotational settings within your Dragon Software to create precision rotational bend marks with your machine."

Rotation Calibration Wizard Setup

  • In order to start the process of calibrating your rotational settings, begin by selecting your "Die Library" Die Library1.png from the Dragon "Task Menu Screen".

Drag Rotation Calib1.png

Select Die and Material

  • Now, select the die you're using along with the associated material that will be used in this calibration. If there are no dies or materials available from the lists, you may need to do a die Calibration and enter your material into the Tube/Pipe Library before continuing.

Drag Rotation Calib2.png

Drag Rotation Calib3.png

Drag Rotation Calib4.png

Drag Rotation Calib5.png

Drag Rotation Calib6.png

Drag Rotation Calib7.png

Drag Rotation Calib8.png

Drag Rotation Calib9.png

Drag Rotation Calib10.png

Drag Rotation Calib11.png

Drag Rotation Calib12.png

Drag Rotation Calib13.png

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Dragon_Rotation_Calibration&oldid=7237"