Machine Control Screen

From Bend-Tech 7x Wiki
Revision as of 11:13, 12 July 2017 by Fabcam1 (talk | contribs)
Jump to: navigation, search

Dragon A-400 Machine Control Screen

  • The Dragon A-400 has a Machine Control screen similar to the A-150's Operator Panel, but will be accessible directly from the laptop/PC screen for use with the machine. This machine control screen will be used by the operator to jog different axes, home the machine, start any projects, check the status of any project and emergency stop the machine when necessary.
Draga400 Operator Panel1.png

Status

  • Under the Status section, the operator panel includes separate windows for travel/action/instructional icons that will light up while the machine is undergoing a certain process. These light up in real time as the machine is in motion.

Draga400 Status Bar1.png

Machine Control

  • Under the Machine Control section, users will have the means to Start, Pause and Stop a project that has been transferred to the machine, adjust feed rates using the Feed +, Feed - and Feed 100% buttons, and turn on the Laser, Engraver and Jog Controls. Jogging controls are explained below.

Draga400 Machine Control1.png

Jog Controls

  • Click on the Jog Controls to move the machine manually along its different axis.

Draga400 Jog Controls1.png

Draga400 Jog Controls2.png

  • The Jog Controls move the machine in the following directions:

X: The front and back movement of the chuck trolley. Y: The clockwise and counter-clockwise rotation movement of the chuck. Z: The left and right movement of the tool head. A: The up and down movement of the tool head.

Draga400 Jog Controls Close1.png

  • Click the Close button from below in order to close the jog controls and reveal the Start and Pause buttons again.
Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Machine_Control_Screen&oldid=8757"