Dragon A400 Side Offsets Calibration

From Bend-Tech 7x Wiki
Revision as of 14:05, 5 October 2017 by Fabcam1 (talk | contribs) (Created page with "'''Dragon A400 Side Offsets Calibration''' ''This calibration is meant for Dragon A400 users experiencing differences in cutting height due to warped or imperfect square and...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Dragon A400 Side Offsets Calibration

This calibration is meant for Dragon A400 users experiencing differences in cutting height due to warped or imperfect square and rectangular tubing.

1. If you require a way to calibrate your warped or imperfect tubing, the option is here for you located in the Tube/Pipe Library under the Advanced tab.


Side Offsets Calib1.png

Side Offsets Calib2.png

Side Offsets Calib3.png

Side Offsets Calib4.png

Side Offsets Calib5.png

Side Offsets Calib6.png

Side Offsets Calib7.png

Side Offsets Calib8.png

Side Offsets Calib9.png

Side Offsets Calib10.png

Side Offsets Calib11.png

Side Offsets Calib12.png

Side Offsets Calib13.png

Side Offsets Calib14.png

Side Offsets Calib15.png

File:Side Offsets Calib16.png

File:Side Offsets Calib17.png

File:Side Offsets Calib18.png

File:Side Offsets Calib19.png

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Dragon_A400_Side_Offsets_Calibration&oldid=8880"