Difference between revisions of "Industrial"

From Bend-Tech 7x Wiki
Jump to: navigation, search
Line 181: Line 181:
  
 
===Define Holes/Cutouts===
 
===Define Holes/Cutouts===
−
*To define holes and cutouts on the part you must first select the "'''Exterior'''" of the hole followed by
+
====Exterior====
 +
*To define holes and cutouts on the part you must first select the "'''Exterior'''" [[File:Exterior_Cut_IND.png]] button followed by the outer arc/circle of the hole you'd like to define.
 +
 
 +
[[File:Ext_button_IND(1).png|500px]]
 +
 
 +
*Then, select the "'''Interior'''" [[File:Interior_Cut_IND.png]] button followed by the inner arc/circle of the hole you'd like to define.
 +
 
 +
[[File:Int_button_IND(1).png|500px]]
 +
 
 +
*When your holes/cutouts are defined, green check marks will appear to the left in the list section under the "'''Outer'''" and "'''Inner'''" labels. Yellow question marks indicate that the "'''Outer'''" or "'''Inner'''" contours have NOT been defined.
 +
 
 +
*Select the "'''Clear All'''" [[File:Clear_All_IND(1).png]] button in order to clear all defined contours for holes/cutouts.

Revision as of 07:03, 11 September 2015

UNDER CONSTRUCTION: THANK YOU FOR YOUR PATIENCE

"Bend-Tech Industrial comes equipped with all of the functionality available in our SE product along with the following."

Importing

"NOTE: All parts that are brought into Bend-Tech Industrial must be in either .STEP/.stp or .IGES/.igs format."

IND Import1.png

2. Choose a file to import by using the standard method. Go up to the File menu at the top left hand corner of the screen, select the Import option and choose from either Solid Model (.step/.stp), STEP (.step/.stp) or IGES (.IGES/.igs) from the list depending on which file format you'd like to import.







Defining The Part

Color Code

1. After importing a solid model, the part will appear with contoured lines, arcs and circles. These are color coded to help you to identify certain sections of the tubing.

IND Part Outline1.png

  • Yellow Lines: Indicate the centerline of the tubing.
  • Blue Lines: Indicate the arcs and circles of the tubing.
  • Red Lines: Indicate the straights within the length of tubing.

Material Definition

Select Material1.png

1. The Select Material: drop down menu will be grayed out until the user has fully tracked the imported part. Once the part is tracked, it will need to be assigned a material which matches its Defined: outer diameter and wall thickness.

Outer Diameter1.png

2. The Material: section will show which material is chosen from the Select Material: drop down menu above. The Outside Diameter (OD) of the material will be shown next to the orange icon and the Material Wall Thickness will be shown next to the blue icon.

Wall Thickness1.png

3. The Defined: section will show which material is applied to the part after importing. The detected Outside Diameter (OD) of the material will be shown next to the orange icon and the detected Material Wall Thickness will be shown next to the blue icon.

Number Of Bends1.png

4. The number of bends detected in the part will be shown next to this icon.

Below this initial section is the tool box with four tabs labeled Part, Manual Tools, Holes & Cutouts and Saddles.

Part

Toolbox1.png

Define Part

  • This section contains the general options for defining a part automatically.

Toolbox2.png

1. For any imported part containing a bend, click on the "Bent" button followed by a single arc/circle (Blue Line) at the end of the tubing in order to track the part automatically. The part will become a 3-D model with material applied to it when it has been successfully tracked.

2. For any imported straight part, click on the "Straight" button followed by a straight side of the tubing (Red Line), then an arc/circle (Blue Line) at the end of the tubing. NOTE: You may have to The part will become a 3-D model with material applied to it when it has been successfully tracked.

3. To clear your progress and revert the part back to its original solid model form, click the "Clear" button. A window will appear to ensure that you want to confirm the changes.

Define Start Profile

  • This section contains the options for defining the interior and exterior edge on the start profile of the tubing.

Toolbox3.png

1. Click on the "Exterior" button followed by the outer arc/circle (Blue Line) at the START of the tubing. NOTE: If the circle at the edge of the tubing is split into smaller arcs, you may have to select multiple arcs along the same path in order to define this exterior circle. If it is Red, it is not complete. If it is Green, the circle has been defined.

2. Click on the "Interior" button followed by the inner arc/circle (Blue Line) at the START of the tubing. NOTE: If the circle at the edge of the tubing is split into smaller arcs, you may have to select multiple arcs along the same path in order to define this interior circle. If it is Red, it is not complete. If it is Green, the circle has been defined.

3. To clear your progress and revert the part back to before the start profile was defined, click the "Clear" button. A window will appear to ensure that you want to confirm the changes.

Define End Profile

  • This section contains the options for defining the interior and exterior edge on the end profile of the tubing.

Toolbox4.png

1. Click on the "Exterior" button followed by the outer arc/circle (Blue Line) at the END of the tubing. NOTE: If the circle at the edge of the tubing is split into smaller arcs, you may have to select multiple arcs along the same path in order to define this exterior circle. If it is Red, it is not complete. If it is Green, the circle has been defined.

2. Click on the "Interior" button followed by the inner arc/circle (Blue Line) at the END of the tubing. NOTE: If the circle at the edge of the tubing is split into smaller arcs, you may have to select multiple arcs along the same path in order to define this interior circle. If it is Red, it is not complete. If it is Green, the circle has been defined.

3. To clear your progress and revert the part back to before the end profile was defined, click the "Clear" button. A window will appear to ensure that you want to confirm the changes.

Auto Tracking/Cut Tracking

Toolbox5.png

  • When these check boxes are checked, the defining process will include automatic tracking and the imported cuts.

Manual Tools

Import IND 1.png
  • Before a part can be fully imported, each section that needs to be included on the part must be defined.


  • Before beginning, keep in mind that a section is represented by simple lines and arcs as seen below. This does not represent the part that will be imported. This only defines which sections can be included in the part definition.


IND Part Outline1.png


  • Also, sections are defined based off the centerline. So, for example, if the Two Points tool is used to define a section, the line between those two points will be used to represent the centerline of that section.




Define Straight Section

Two Points

  • To define a section using two points, select the "Two Points" Two points1.png button. First, click on one pick point. Once the first point is selected, a green wireframe preview of the section will generate from this point. To place the end of this section, select another Pickpoint.

Import 07(1).png

Circle -> Distance

  • To define a section by selecting a circle and any point, select the "Circle -> Distance" Circle distance(1).png button. First, select on a circle feature. Once the circle is selected, a green wireframe preview of the section will generate from this point. Next, define the length of the section by choosing a Pickpoint.

Import 08(1).png

Line

  • To define a section by selecting a line feature, select the "Line" Import line(1).png button. Next, click on a line feature that will represent the centerline of the section.

Import 09(1).png

Define Bend

Two Circles

  • To define a bend between two circle features, click the Two Circles Two circles(1).png button. Next, click on the first circle. Once the circle is selected, a green wireframe preview of the section will generate from this point. Then click on another circle to place the section.

Import 10(1).png

Center, Start, End

  • To define a bend by selecting the center, start, and end points, select the Center, Start, End Center start end(1).png button. Next, click the centerpoint of the bend. This point will be located off the bend, at the center of the arc as if it were a full circle. Then click on the starting point of the arc and lastly, the end point of the arc to place the section.

500px

Start, Mid, End

  • To define a bend by defining the starting point, mid point, and end point, select the Start, Mid, End Start mid end(1).png button. First, selecting the centerline start point of the arc, the mid point, and then the centerline end point.

Arc

  • To define a bend by selecting an arc feature, select the "Arc" Import arc(1).png button. Next, select on an arc feature that will represent the centerline of the bend.

Import IND 12(1).png

Two Straights

  • To define a bend by selecting the straight lengths on either side, select the "Two Straights" Two straights(1).png button. Click on the line on one side of the arc, then click on the line on the other side.

Import 13(1).png

Reverse Last

  • Select the "Reverse Last" Reverse last1.png button to reverse the last bend.


Modify Sections

Extend Straight

  • To add or remove length from a straight section of tube, select the "Extend Straight" Extend straight1.png button. Next, click on the section that will be adjusted. Then enter the amount to add or remove (enter as a negative to shorten) and select the "OK" button.

Import 15(1).png500

Remove Section

  • To remove a defined section from the part, select the "Remove Section" Remove section.png button. Then, just click on a red highlighted section for it to be removed.

Import 18(1).png

Tools

Delete Feature

  • To delete a feature made up of one of the Yellow, Blue, Red, or Green lines/arcs/circles, select the "Delete Feature" Delete feature IND.png button. Next, click on the feature that will be deleted.

Delete Feature IND(1).png

Add Line

  • To add a new line to the existing part, select the "Add Line" Add Line IND.png button. Then, select a Pickpoint that will indicate the start of the line followed by a pickpoint that will indicate the end of the line.

Add-Line IND(1).png

Holes & Cutouts

Define Holes/Cutouts

Exterior

  • To define holes and cutouts on the part you must first select the "Exterior" Exterior Cut IND.png button followed by the outer arc/circle of the hole you'd like to define.

Ext button IND(1).png

  • Then, select the "Interior" Interior Cut IND.png button followed by the inner arc/circle of the hole you'd like to define.

Int button IND(1).png

  • When your holes/cutouts are defined, green check marks will appear to the left in the list section under the "Outer" and "Inner" labels. Yellow question marks indicate that the "Outer" or "Inner" contours have NOT been defined.
  • Select the "Clear All" Clear All IND(1).png button in order to clear all defined contours for holes/cutouts.
Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Industrial&oldid=5636"