Machine Control

From Bend-Tech 7x Wiki
Revision as of 13:19, 13 September 2016 by Fabcam1 (talk | contribs)
Jump to: navigation, search

The Machine Controller will open every time the Dragon software opens the Mach 3 software. The Machine Controller can also be accessed remotely by selecting it from the Toolbar/Status Bar in the Dragon CAM software.

The Machine Controller is used to home the Dragon machine, move any and all axis and to zero out the axis as needed.

Machine Control2.png
Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Machine_Control&oldid=7951"