Difference between revisions of "Tekla Import Guide"
| Line 9: | Line 9: | ||
[[File:Select_Tekla1.png]] | [[File:Select_Tekla1.png]] | ||
| − | ==Open a Project== | + | ===Open a Project=== |
*Select a file from the list and click the '''Open''' button to open it in the Tekla Import screen. | *Select a file from the list and click the '''Open''' button to open it in the Tekla Import screen. | ||
Revision as of 08:57, 10 May 2016
Bend-Tech's Tekla importer is useful for customers with .step and .iges file types that contain a boundary representation of the tube model. These file types are exported from the Tekla software programs. Examples are illustrated in the pictures below.
Tekla Import Access
- To access the Tekla Model Importer, select the CAD Import Menu
from the Task Menu and select the Tekla Model 
option from the list.
Open a Project
- Select a file from the list and click the Open button to open it in the Tekla Import screen.
Material Definition
1. The Select Material: drop down menu will be grayed out until the user has fully tracked the imported part. Once the part is tracked, it will need to be assigned a material which matches its Defined: outer diameter and wall thickness.
2. If a material is not set up in your material library that will match the imported part, clicking the Plus: 
button will add the imported material for you and assign it to the current part or project.
3. The Material: section will show which material is chosen from the Select Material: drop down menu above. The Outside Diameter (OD) of the material will be shown next to the orange icon and the Material Wall Thickness will be shown next to the blue icon.
4. The Defined: section will show which material is applied to the part after importing. The detected Outside Diameter (OD) of the material will be shown next to the orange icon and the detected Material Wall Thickness will be shown next to the blue icon.
5. The number of bends detected in the part will be shown next to this icon.
