Difference between revisions of "MSP Template"
| Line 12: | Line 12: | ||
*When opening a new template window, it is easier if the user selects the "'''Maximize'''" [[File:Min_Max_Close_Tab.png]] button right away. This way, the part chosen by the user will appear in the center of the display area and will not be obstructed by the template's dimension picture in the upper left hand corner of the screen. | *When opening a new template window, it is easier if the user selects the "'''Maximize'''" [[File:Min_Max_Close_Tab.png]] button right away. This way, the part chosen by the user will appear in the center of the display area and will not be obstructed by the template's dimension picture in the upper left hand corner of the screen. | ||
| − | + | *'''Every template options has "3" tabs. Other than the "Current Template Values", these three tabs will always have the same buttons and entry fields.''' | |
| − | + | ===Material=== | |
| + | ====Define Material:==== | ||
| + | *From here, users can "'''Name:'''" the material being used for the design, specify the "'''Thickness:'''", and assign a "'''Part Color:'''" to the part displayed to the right. | ||
| + | *Users can also change the length increments by selecting either the "'''Inches'''" or "'''Millimeters'''" options. | ||
| + | ====Current Template Values:==== | ||
| + | *The distance labeled "'''D1'''" (default 1) is the length of the diameter of the '''outside''' edge of the end cap. | ||
| + | ===Part Details=== | ||
| + | *"'''Notes:'''" is where the user can make notes about the part's dimensions or specifications. | ||
| + | *"'''Date:'''" is where the user can mark when the part was created or when it is set to be manufactured. | ||
| + | *"'''Revision:'''" is where the user can update the date when the part specifications were revised. | ||
| + | *"'''Description:'''" is where the user can provide a description of the part's specifications. | ||
| + | ===Tasks=== | ||
| + | *"'''Verify'''" | ||
| + | *"'''Export dxf'''" | ||
| + | *"'''Export Plasma dxf'''" | ||
==Style of Plate== | ==Style of Plate== | ||
*The "'''Style of Plate'''" section shows all of the categories of MSP Templates available. | *The "'''Style of Plate'''" section shows all of the categories of MSP Templates available. | ||
| Line 29: | Line 43: | ||
*Clicking the star will change it from white to gold, which indicates a user favorite. All gold starred templates are user favorites. | *Clicking the star will change it from white to gold, which indicates a user favorite. All gold starred templates are user favorites. | ||
| − | + | =Washers Category= | |
| − | + | *The first button in the "'''Style of Plate'''" section is for "'''washers and end caps'''" style projects. | |
| − | *The first button in the "'''Style of Plate'''" section is for "'''washers | + | ==End Cap== |
| − | ===Washer | + | *Selecting the "'''End Cap'''" template will open a new window labeled "End Cap". |
| + | *The illustration in the upper left hand corner of the display area will show what dimensions are needed to create the part. | ||
| + | *"'''Maximize'''" the window, otherwise double click the display area to reveal the default part. | ||
| + | ====Current Template Values:==== | ||
| + | *The distance labeled "'''D1'''" (default 1) is the length of the diameter of the '''outside''' edge of the end cap. | ||
| + | |||
| + | ==Washer== | ||
*Selecting the "'''Washer'''" template will open a new window labeled "Washer". | *Selecting the "'''Washer'''" template will open a new window labeled "Washer". | ||
| − | * | + | *The illustration in the upper left hand corner of the display area will show what dimensions are needed to create the part. |
| + | *"'''Maximize'''" the window, otherwise double click the display area to reveal the default part. | ||
====Define Material:==== | ====Define Material:==== | ||
*From here, users can "'''Name:'''" the material being used for the design, specify the "'''Thickness:'''", and assign a "'''Part Color:'''" to the part displayed to the right. | *From here, users can "'''Name:'''" the material being used for the design, specify the "'''Thickness:'''", and assign a "'''Part Color:'''" to the part displayed to the right. | ||
Revision as of 13:13, 24 November 2014
Bend-Tech 7x Wiki :: MSP Template
Due to its length, the MSP Template Guide has a Table of Contents to accommodate the user.
The MSP Template options allow for a variety of Sheet Metal created parts to be designed at the user's specific dimensions. Parts created in the MSP Template designer can be brought into Sheet Metal and other interfaces. Parts can also be cut and the wrappers for these cuts can be printed out here.
To open a new MSP Template design:
- Select the "MSP Template"
option from the Task Menu that appears when the software starts up, when all designs are closed, or through the view menu.
- When opening a new template window, it is easier if the user selects the "Maximize"
button right away. This way, the part chosen by the user will appear in the center of the display area and will not be obstructed by the template's dimension picture in the upper left hand corner of the screen.
- Every template options has "3" tabs. Other than the "Current Template Values", these three tabs will always have the same buttons and entry fields.
Contents
Material
Define Material:
- From here, users can "Name:" the material being used for the design, specify the "Thickness:", and assign a "Part Color:" to the part displayed to the right.
- Users can also change the length increments by selecting either the "Inches" or "Millimeters" options.
Current Template Values:
- The distance labeled "D1" (default 1) is the length of the diameter of the outside edge of the end cap.
Part Details
- "Notes:" is where the user can make notes about the part's dimensions or specifications.
- "Date:" is where the user can mark when the part was created or when it is set to be manufactured.
- "Revision:" is where the user can update the date when the part specifications were revised.
- "Description:" is where the user can provide a description of the part's specifications.
Tasks
- "Verify"
- "Export dxf"
- "Export Plasma dxf"
Style of Plate
- The "Style of Plate" section shows all of the categories of MSP Templates available.
- Selecting a style from the list will open a new page showing variations of template options for the user to open and adjust to their desired dimensions.
ETC
- The "'ETC" button will open a new page showing templates that don't easily fall into a discernible category.
List All
- The "List All" button will show every MSP Template available.
Star 'Favorite' Button
- The Star, or 'favorite' button will show all the templates that the user has saved to their favorites.
- Clicking the star will change it from white to gold, which indicates a user favorite. All gold starred templates are user favorites.
Washers Category
- The first button in the "Style of Plate" section is for "washers and end caps" style projects.
End Cap
- Selecting the "End Cap" template will open a new window labeled "End Cap".
- The illustration in the upper left hand corner of the display area will show what dimensions are needed to create the part.
- "Maximize" the window, otherwise double click the display area to reveal the default part.
Current Template Values:
- The distance labeled "D1" (default 1) is the length of the diameter of the outside edge of the end cap.
Washer
- Selecting the "Washer" template will open a new window labeled "Washer".
- The illustration in the upper left hand corner of the display area will show what dimensions are needed to create the part.
- "Maximize" the window, otherwise double click the display area to reveal the default part.
Define Material:
- From here, users can "Name:" the material being used for the design, specify the "Thickness:", and assign a "Part Color:" to the part displayed to the right.
- Users can also change the length increments by selecting either the "Inches" or "Millimeters" options.
Current Template Values:
- The distance labeled "D1" (default 1) is the length of the diameter of the outside edge of the washer.
- The distance labeled "D2" (default .5) is the length of the diameter of the inside edge of the washer.
