Tools

Bend-Tech 7x Wiki :: Main Menu Bar :: Tools

In the Tools menu, the options menu, Tube/Pipe Library, Plate/Sheet Library, Die Library, Machine Library, J-Bend Library, Price Settings, Primary Templates, and the Export Template menu can be accessed.

Options

Click 'Options' to access the options/settings menu. Follow the "Options" link for further information on each tab in the Options menu.

Export Template

In the Export Template Design menu, the designs of Export Templates can be set up. Follow the "Export Template" link for further information on designing export templates.

Die Library

The die library stores all of the dies that can be used. On the left side of the die library, a list of all available dies is show below 'Die List'. To the right of the list, Die details, die limitations, and user defined definitions are shown.

Tube/Pipe Library

The Tube/Pipe Library holds all the materials that can be used to create bent parts in the part designers.

Plate/Sheet Library

The Plate/Sheet Library holds all materials that can be used to create plate parts.

SpringBack Library

Machine Library

The Machine Library stores all machines that can be used to apply settings to and simulate the bending of a single part.

J-Bend Library

The J-Bend Library stores all J-Bends that can be used to create headers.

Pricing Settings

Once the price settings have been set up, the total cost of a part, plate, or assembly, including labor, setup time, time per bend, and cost per unit, can be determined.

SW Plugin Settings

Import Settings

Manual Import: This option makes it so SolidWorks files need to be defined manually before being fully imported once they have been sent to Bend-Tech.

Automatic Import: While this option is enabled, Bend-Tech will attempt to automatically define and import all SolidWorks files that have been sent to Bend-Tech. If Automatic Import is selected and Always Prompt for Material is checked, every time a SolidWorks file is automatically imported, a material must be chosen for the part. If Automatic Import is selected and Send Part to XYZ Interface is checked, once SolidWorks parts are imported, they will be sent to the XYZ part design interface.

Show Results Window: Check this option to open the Part Details window once the part has been fully imported.

Automatically Find and Import Data: Check this option to have SolidWorks parts automatically brought into the import interface once a part has been send to Bend-Tech without having to click the SolidWorks icon at the top of the window or File - Import - SolidWorks.

Export Template

The default export template design can be set here. Export templates are defined in the Export Template designer. This template will be the export template that is initially chosen when the Part Details window shows up. To change the export template, click the drop down menu and select an option from the list.

Register SW Plugin

This button is used to register an SW module after it has been activated using Activate Module.

User Profile

Entering information in the User Profile allows the user to have their information attached to the software. The initials given here will be printed on any setup sheets that are printed out.

To add or change any of the user profile information, simply enter a new definition for any of the available fields. Click 'OK' to save and exit. Click 'Cancel' to exit without saving any entered information.

Backup and Restore

The software can backup and/or restore all the data libraries, part files, assembly files, favorite templates, user profile, export templates, and program settings.

Activate Module

Upgrade Product

After purchasing an upgrade for your Bend-Tech software, it can be updated using this form. The Serial Number and Key Code are required to successfully upgrade.