Plate/Sheet Library

From Bend-Tech 7x Wiki
Revision as of 11:28, 30 May 2014 by Fabcam1 (talk | contribs)
Jump to: navigation, search

Bend-Tech 7x Wiki :: Main Menu Bar :: Tools :: Plate/Sheet Library

Plate library 1.png


Material Details

  • Material Name: This title will be used to refer to the material throughout the software. It is recommended to give each a unique, descriptive name to more easily identify each material



  • Weight: The weight of the material per unit can be supplied here. This value is totally optional, but it will be used to calculate the total weight of the part in the part designer interfaces above the results table.



  • Units: Plate parts can be measured in either inches or millimeters.


  • Material Thickness: The thickness of the plate material will need to be provided here. Enter the value into the field on the part diagram.
Plate library 2.png


  • Color: The color of the plate material can be chosen using the Color button. Color button.png This color will be used to shade the material throughout the software.


Bending Radius List

The bending radius is the radius that the material can be bent to.


Add Plate/Sheet

Manual


Import

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Plate/Sheet_Library&oldid=311"