Register SW Plugin

From Bend-Tech 7x Wiki
Revision as of 07:15, 23 September 2014 by Fabcam1 (talk | contribs)
Jump to: navigation, search

Bend-Tech 7x Wiki :: Main Menu Bar :: Tools :: Register SW Plugin


This is a quick guide to walk the user through registering SolidWorks within the Bend-Tech 7x software. This will allow the user to import files from SolidWorks into the Bend-Tech 7x program.

  • There are two ways to make sure that the SolidWorks program is registered with Bend-Tech:
    Register SW Plugin1.png
Register SW Plugin2.png
Register SW Plugin3.png
Register SW Plugin5.png
Register SW Plugin4.png

1. If this window appears upon starting up Bend-Tech 7x, select "Yes" and follow the steps upon start up.




OR...



2. Register the program manually by going to Main Menu Bar --> Tools --> SW Plugin and selecting the Register button.











3. With either procedure, the Register SW Plugin window will open.

4. Under .NET Framework, choose the most recent version and highest bit driver option and select "Register" to continue.








5. The following window will open. Select "Yes"

6. When the window asking if "you'd like to make changes to this computer", select "Yes".






Congratulations! You've successfully registered SolidWorks with Bend-Tech 7x.

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Register_SW_Plugin&oldid=3509"