Plate

Sheet Metal/Plate

Create

Point

• Cursor
• Incremental
• Angle
• Absolute
• Intersection
• Entity End
• Entity Center
• Entity Mid-Point

Line

• Two Points
• Horizontal
• Vertical
• Horizontal and Vertical
• Rectangle (Two Points)
• Parallel
• Perpendicular
• Angle Absolute
• Angle Relative
• Tangent through Point
• Tangent Two Arcs
• Notches

Edit

• Delete
• Move
• Trim
• Scale
• Copy

Part

• Definition

• Bends

• Assembly

Details

• Features

• Layers

• Flanges

• Rotation

• Display

Tools

Description

Using the tools tab, you can change the line type and color of features in both the Design View and the Flat Layout. There are a few other features in the Tools tab as well.

How-To

• Refresh: Refreshes the Flat Layout. If the Flat Layout is refreshed, any changes that you have made to it using the Tools tab will be lost.

• Toggle: Switches between the Design View and the Flat Layout.

• Export: Exports the Flat Layout as a .DXF file.

• Line Type: Select a line type in the Tool Bar and click the Line Type button in the Tools tab. Select a line to change its type. For information on selection, see the Selection and Features to Include pages.

• Color: Select a color in the Tool Bar. Click the Color button in the Tools tab and use a Selection feature of your choosing. If desired, you may also use the Features to Include function.

• Clean Up: Deletes any duplicate features or zero-length features.

• Flange Intersection: Click on the Flange Intersection button and click on two intersecting flanges.

Settings

Description

The Settings tab contains various options that can be used to customize interface.

Settings

• Cursor: Select either Default, Small, Small Diagonal, or Large to change the look of the cursor. Select each one and move the cursor over the display window to see what it looks like.

• Display Color: Click the Background button to change the background color of the display window using the Color menu.

• Background Image: To display an image in the background of the display window, click the Choose button and find a picture by using the windows file browser.

• Display Background Image: Toggles the display of a background image in the display window.

• Create Points at Intersections: Toggles the automatic creation of points at intersections between entities.

• Allow Selection of End Points: If this box is checked, end points of lines and arcs can be used as points for the placement of other features.

• Exclude External Holes: If this box is checked, holes that are not on a flange will be ignored.

• Dim Display for Free Select: Toggles the dimming of the display window when Free Select mode is active.

• Automatically Switch to Design View: Toggles the automatic switching to the Design View that occurs whenever the Design View is necessary for a function.

Toolbar

The Tool Bar is the row of buttons just below the Main Menu Bar.

Click the New Part icon to open the create new menu. This menu will allow you to choose a new part designer interface and begin a new part design.

Click the New Assembly icon to open a new assembly design. See the Assembly page for further information on creating an assembly.

Click the New Plate icon to open a new plate design. See the Plate page for further information on designing a plate.

Click the New Header icon to open a new header design. See the Header Design page for further information.

Click the Open icon to open a part, assembly, plate, or header file.

Click the Save icon to save the current active window's progress. If the current window is a new and hasn't been saved previously, the part will need to be given a name and location. Click 'Save' in the Save window to save.

Click the Print icon to print out an image of the current view of the plate design in the display.

Click the Print Preview icon to view a preview of the plate design image print out.

Click the Solidworks icon to import a part file from Solidworks that has been sent to Bend-Tech.

Click the Display menu to alternate between design, defined, 3D wireframe, 3D shaded, and flat layout mode. See the design mode page for information on each of these options.

Click the Refresh icon to refresh the part display.

Click the Home button to reset the 3D part display to its original default view.

Click the Zoom button to zoom all the way in on the current view of the 3D part display and fit it to the display frame.

Color: Click the color icon to change the color of future point and line features in the plate design display.

Line Type: Any new lines that are placed will be the type of line that is selected in the Line Type drop down menu. Click the small picture of a line to the right of the phrase "Line Type" to open the Line Type drop down menu.

Layer: Use the Layer drop down menu to select a layer. You can only work on the currently selected layer.

Flange: To switch the active flange, use the Flange drop down menu.